معرفی محصول

امپوزیت رادیواپک لایت کیور فلو با آزادسازی فلوراید.استحکام فشاری بالا.نانو تکنولوژی.در سه ویسکوزیته مختلف.فلورسانس طبیعی.بدون تغییر در رنگ بعد از کیور شدن.A flowable for all your clinical situationsNanofilled
Wave, Wave MV and Wave HV contain specially treated nano-fillers to maximize polishability, wear resistance and strength. Ease of extrusion is improved with the addition of these specially treated nano-fillers.
Radiopacity
Wave, Wave MV and Wave HV are all visible on x-rays. This allows easy identification of secondary caries at the interface.
1. Clean and isolate tooth.
2. Remove excess water. Preferably keep moist, but a dry surface is ok
3. Apply Go! to saturate all internal surfaces and leave in place for 20 seconds. Or, apply other bonding agent according to manufacturer’s instructions.
4. Blow firmly with dry, oil free air for 5 seconds. Leave surface glossy.
5. Light cure for 10 seconds.
6. Directly inject Wave in increments of 2mm or less in:
6.1 Class V restorations or
6.2 Tunnel preparations or
6.3 Pit and fissure sealants or
6.4 Minimal Class I, Class II, Class III and Class IV
restorations, or other indications as required.
7. Cure Wave for 20 seconds in increments of 2mm.
8. Polish and finish.